New Bridgeport Mill

Posted: July 28th, 2011 | Author: marshall | Filed under: Blog | Tags: Bridgeport, machines, metal, shop, tools | 2 Comments »

After years of searching for a good deal, last month I bought a beautiful used Bridgeport milling machine for the shop.  Awesome!

I bought it in Bridgeport, CT from a guy selling a lot of equipment from a mold making shop that closed. Originally interested in a small M-head Bridgeport with a small work surface, I saw this variable speed beauty and couldn’t resist.

I got a great deal with all this, and was able to throw in all kinds of extras! A vise in good shape, a rotary table, a high-quality drill bit chuck, a box of misc. mills and a bunch of collets! Here it is at the warehouse with all the good stuff:

And transporting wasn’t as much a problem as I thought. I drove a Penske truck up to the warehouse in Bridgeport, popped the head off (with much friendly help from the forklift operator) and they loaded the beast onto the truck with a pallet. Strapped that sucker down & good to go:

Off-loading was not TOO bad. It would have been a bit easier if I had (a) borrowed a forklift, or (b) asked for any help whatsoever. But amazingly I did get it off the truck and into my shop with nothing more than a pallet jack. The tricky part was compensating for the fact that the truck was too low for the loading dock at the Brooklyn Navy Yard. I had to back the truck up on ramps I made from some 2 x 10 boards lying around. Then I had to work the pallet slowly toward the back of the truck (since I was working against a bit of a slope). This took some time, moving forward a few inches at a time, and screwing a board to the floor of the truck to keep everything from sliding back again. Anyway, it all worked out. Here it is safely on the loading dock:

Once in the shop, I borrowed a friend’s chain hoist & popped the head back on:

Moved everything in place with the pallet jack, and all was done!

Hooray! Time to get to work:

---